The new Raspberry Pi 400 kit features everything in one fully-enclosed compact unit, removing the need for multiple components, whilst delivering a clock speed of 1.8GHz, higher than other Raspberry Pi boards on the market. All that is required to start using the Raspberry Pi 400 as an out-of-the-box computer is a monitor. The start-up kit includes a Raspberry Pi 400, pre-programmed SD card, power supply, mouse, a beginner's guide and micro HDMI cable.
1.8GHz quad core ARM Cortex-A72 CPU, 4GB LPDDR4-3200 DRAM
VideoCore VI graphics (OpenGL ES 3.1, Vulkan)
4K UHD at 60Hz HEVC decoding
True gigabit Ethernet
2x USB 3.0 and 1x USB 2.0 ports
2x micro HDMI ports (1x 4K at 60Hz or 2x 4K at 30Hz)
USB-C for input power, supporting 5V 3A operation
Raspberry Pi-compatible 40-pin horizontal GPIO connector
Kensington lock
ภายในชุดประกอบไปด้วย
1. Raspberry Pi400 integrated keyboard/Pi4-4GB, IT keyboard layout
2. 16GB microSD card, pre-programmed with Raspberry Pi OS
3. Raspberry Pi power supply(EU)
4. Raspberry Pi mouse
5. Micro-HDMI to HDMI-A cable( 1m white)
6. Official Raspberry Pi beginner's guide. ภาษาอิตาลี
Orange Pi PC+
mini-pc ที่ใช้งานง่าย ที่ใครก็สามารถใช้ได้ ไม่ว่าจะเป็นคนที่เพิ่งเริ่มหรือคนที่เชี่ยวชาญแล้ว สามารถใช้เริ่มทำ โปรเจคง่ายๆไปจนถึงสามารถใช้จริงในภาคอุตสาหกรรมได้เลย และสามารถลงOS ได้มากมาย เช่น Android , Ubuntu , Debian
Orange Pi PC+ is for anyone who wants to start creating with technology- not just consuming it. lt's a simple, fun, useful tool that you can use to start taking control of the world around you.
Hardware specification
CPU
H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU
• Mali400MP2 GPU @600MHz• Supports OpenGL ES 2.0
Memory (SDRAM)
1GB DDR3 (shared with GPU)
Onboard Storage
TF card (Max. 32GB) / MMC card slot
Onboard Network
10/100M Ethernet RJ45
Video Input
• A CSI input connector Camera:• Supports 8-bit YUV422 CMOS sensor interface• Supports CCIR656 protocol for NTSC and PAL• Supports SM pixel camera sensor• Supports video capture solution up to 1080p@30fps
Audio Input
MIC
Video Outputs
• Supports HDMI output with HDCP• Supports HDMI CEC• Supports HDMI 30 function• Integrated CVBS• Supports simultaneous output of HDMI and CVBS
Audio Output
3.5 mm Jack and HDMI
Power Source
DC input can supply power, but USB OTG input don’t supply power
USB 2.0 Ports
Three USB 2.0 HOST, one USB 2.0 OTG
Buttons
Power Button(SW4)
Low-level peripherals
40 Pins Header
GPIO(1x3) pin
UART, ground.
LED
Power led & Status led
Key
IR input, POWER
Supported OS
Android Ubuntu, Debian Image
Product display
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product's key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 8GB of RAM, dual-band. 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
8GB LPDDR4 SDRAM
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
True Gigabit Ethernet
2 x USB 3.0 ports, 2 x USB 2.0 Ports
Fully backwards compatible 40-pin GPIO header
2 x micro HDMI ports supporting up to 4K 60Hz video resolution
2-lane MIPI DSI/CSI ports for camera and display
4-pole stereo audio and composite video port
MicroSD card slot for loading operating system and data storage
Requires 5.1V, 3A power via USB-C or GPIO.
PoE (Power over Ethernet) enabled (requires PoE HAT)
The power supply is suitable for use with Raspberry Pi 4 Model B 1/2/4/8 GB RAM.
RPI POWER SUPPLY USB-C-5.1V/3A, US BLACK; Accessory Type:RPI Power Supply USB-C-5.1V, 3A, US Black;
For Use With: Raspberry Pi 4; Product Range:RPi 4 Model B Power Supplies; SVHC:No SVHC
Due to the product taking longer than usual to arrive.
Please inquire about the product every time before making payment. Thank you very much.
The Raspberry Pi 3 Model B+ is the latest addition to the Raspberry Pi 3 family, featuring a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz WiFi 2.4/5GHz, Bluetooth 4.2/BLE, and PoE capability (via a separate PoE HAT add-on).
details
Broadcom BCM2837B0, Cortex-A53, 64-bit, Quad-core SoC at 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz / 5GHz IEEE 802.11 b / g / n / ac Wireless LAN (WLAN)
Bluetooth Low Energy v4.2 (BLE)
Gigabit Ethernet via USB 2.0 (Max speed 300Mbps)
4 x USB 2.0 ports
GPIO 40 pin
Full Size HDMI, MIPI DSI display port, MIPI CSI camera port
4-pole stereo audio/composite video output port
MicroSD card slot for operating system and storage
Enable Power over Ethernet (PoE) (requires separate PoE HAT)
Power supply requirements - 5V/2.5A DC via micro USB or GPIO
Raspbian operating system
The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE. capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz/5GHz IEEE 802.11 b/g/n/ac Wireless LAN (WLAN)
Bluetooth Low Energy v4.2 (BLE)
Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
4 x USB 2.0 Ports
Extended 40-pin GPIO Header
Full Size HDMI, MIPI DSI display port, MIPI CSI camera port
4-pole stereo audio/composite video output port
MicroSD card slot for operating system and data storage
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Power supply requirements - 5V/2.5A DC via micro USB or GPIO
Power SupplyStable and durable, multiple protection, more security Type-C connector, 5V 4A
Input Voltage Range : 90Vac to 264Vac
Rated Input Voltage : 100Vac to 240Vac
Input Frequency Range : 47Hz-63Hz
Input Current : 0.8A max. (I/P100-240Vac)
Size : L76*W44*32mm
Weight : 125g
Cable lenght : 1.2m
Orange Pi 4B is an open-source single-board computer with dual-band wireless WiFi and Bluetooth 5.0 .It is highly compact with a dimension of 91X55.7mm.
Orange Pi 4B uses the Allwinner H6 SoC, and has 2GB LPDDR3 SDRAM, 8GB EMMC Flash. It can run Android 9,Ubuntu,Debian. Orange Pi 4B offers a range of different ports, including HDMI output, 26pin headers, Gbps Ethernet port,1*USB 3.0, 2* USB2.0，etc. It is powered through Type-C. It is a good choice for applications that need strong networking perfomance.
Hardware specification
CPU
• Rockchip RK3399 (28nm HKMG process)• 6-core ARM® 64-bit processor ,main frequency speeds up to 1.8GHz• Based on the large and small size core architecture of big.LITTLE :• Dual-core Cortex-A72 (large core) + Quad-core Cortex-A53 (small core)
GPU
• Mali-T864 GPU• Supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1,OpenCL, DX11, support AFBC
NPU
• SPR2801S, adopt MPE and APiM unique AI architecture• Typical calculation power 2.8Tops, with 9.3Tops/W ultra high performance
Memory+Onboard Storage
Dual 4GB LPDDR4 + 16GB EMMC flash
Onboard WiFi+Bluetooth
AP6256, IEEE 802.11 a/b/g/n/ac, BT5.0
Network
10/100/1000Mbps Ethernet ( Realtek RTL8211E )
Audio
• Output: 3.5mm Jack and HDMI2.0a• Input: MIC
Video Outputs
• 1 x HDMI 2.0 ( Type-A ), Supports 4K@60fps output• 1 x DP 1.2 (Display Port) , Supports 4K@60fps output• Supports Dual MIPI-DSI （4 lines per channel）
Camera
2 x MIPI-CSI(MIPI_RX0、MIPI_TX1/RX1)
USB
2 x USB2.0 HOST，1 x USB3.0 Type-C
RTC
Support RTC, on-board battery backup interface
Debug UART
3pins Debug UART
GPIO
• GPIO1 40 pins（1 x I2S、2 x I2C、1 x SPI/UART、8 x GPIO）• GPIO2 24pin PCIE port
Key
Upgrade Key & Reset Key
Power Source
DC 5V/3A， TYPE-C 5V/3A
LED
Power led & Status led
OS Support
Android 8.1、Ubuntu 16.04、Ubuntu 18.04、Debian 9
PCB
8 Layer
Dimension
91mm*55.7mm
1. Orange Pi is a small computer board with many capabilities, suitable for those who want to create projects that require high performance but want to keep a budget.
2. With its meticulous design and best value, Orange Pi is a price you shouldn’t miss. You can choose from a variety of models to suit your needs, including WiFi, Ethernet, USB, HDMI, and more.
3. With the capabilities of Orange Pi, you can use it in many ways, such as a server, display, receiver or a small computer board to create various projects.
4. Whether you are a software developer or a coder, you can use Orange Pi to help you develop programs efficiently and save time.
5. We have nationwide shipping and a quality team to provide full service to our customers. So don't wait, buy Orange Pi from us today!
