Raspberry Pi Imager is a quick and easy way to install Raspberry Pi OS and other operating systems onto a micro SD Card ready to use with your Raspberry Pi. Before starting the installation, you will need:

1. Computer PC / Laptop
2. Micro SD Card with a capacity of at least 16 GB
3. SD Formatter Program
4. Raspberry Pi Imager

How to install

1. We will prepare the Micro SD Card by formatting it by downloading the SD Formatter program (download link https://www.sdcard.org/downloads/formatter ) and installing it on the computer, then format the Micro SD Card using SD Formatter.

2. Download Raspberry Pi Imager (link https://www.raspberrypi.com/software ) and install it.

3. Select the OS by clicking on “CHOOSE OS”, there will be many OSs for us to choose from. We will select the basic OS by selecting Raspberry Pi OS (32bit).

4. Select “CHOOSE STORAGE” which is our Micro SD Card that has been formatted.

5. After that, we can press “WRITE”.

6. The OS has been successfully installed and is ready to be installed on the Raspberry Pi board.

refer

SD Memory Card Formatter

https://www.sdcard.org/downloads/formatter

Raspberry Pi OS

https://www.raspberrypi.com/software

I would like to order Raspberry Pi Pico and accessories.

Or ask for product details

Line @raspberrypi Click http://line.me/ti/p/@raspberrypi

For ordering channels, click the link below.

Website https://globalpishop.com/

• Share on:
• WhatsApp
• Deel
• X
• Pin it
• Messenger
• Email

---